De-ragging pump station equipment removes wipes and other fibrous material that has become entangled around pumps, intakes or fittings. A high level or alarm can have other causes, so the restriction needs to be located before removal begins.
De-ragging Pump Station
Pump-station de-ragging for wipes and fibrous material affecting pumps, intakes and level controls.
HomeDe-ragging Pump StationDe-ragging Pump Station enquiry
Fibrous blockages
Wipes and other fibres can collect at pump intakes, rotating parts, floats and other fittings.
Safe isolation
Hazardous access to pumping equipment requires isolation from energy and unintended restart before material is removed.
Where ragging has accumulated
Fibres can collect at pump intakes, around rotating components or on floats and cables. Alarm history and pump behaviour can help focus the checks, but they do not prove that ragging is the only fault.
Isolation before hazardous access
Removing material from a pump or moving component requires suitable electrical and mechanical isolation, control of stored energy and protection against inadvertent restart. Incoming sewage and any pump lifting also need to be managed by competent personnel.
Pump-station de-ragging
Complete the form and we will get back to you.
Repeated ragging and pump condition
Visible wear or damage found after the obstruction is removed may need separate servicing. De-ragging clears the material present but does not establish the condition of the pump or controls.
Ragging can mask another fault
Clearing a blocked intake may restore flow while leaving a damaged component, control fault or downstream restriction unresolved. De-ragging therefore addresses the obstruction found, not the whole operating condition of the station.
When ragging recurs, the useful evidence is the type of material, where it collects and how the pump behaves after clearance. Those observations help distinguish repeated material input from a separate operating problem.
De-ragging Pump Station: common questions
Is every high-level alarm caused by rags?
No. Pump, control, power, inflow or downstream faults can produce similar symptoms.
Can rags be pulled out while the pump is running?
No. Hazardous access requires appropriate isolation and safe handling arrangements.
Does de-ragging prove the pump is undamaged?
No. Condition and functional checks may still be needed after the obstruction is removed.
What if the same ragging problem keeps returning?
The material entering the system, operating conditions and pump suitability may need investigation rather than repeated clearance alone.
Can de-ragging include pump lifting?
It may be required for access, but lifting and handling the pump are separate controlled operations that need suitable equipment and competent personnel.