Leachate removal collects liquid produced as water passes through waste or contaminated material. Its composition can differ substantially from ordinary sewage, so the waste source and relevant analysis are important before collection.
Leachate Removal
Leachate removal based on the waste source, current composition and the receiving facility’s acceptance requirements.
HomeLeachate RemovalLeachate Removal enquiry
Leachate composition
The waste source and current representative information determine how the liquid should be described and accepted.
Contained storage
Continued leachate production and settled solids can affect recovery while containment is maintained.
Leachate source and composition
Landfill cells, waste-storage areas and other containment systems can produce leachate with different dissolved contaminants and suspended solids. Changes in the waste input or site conditions can also change the liquid over time.
Storage levels and continuing production
Leachate can continue entering a tank or lagoon while collection takes place. Recovery needs to preserve containment and account for the available storage, access and any dense material that has settled separately from the liquid.
Leachate removal
Complete the form and we will get back to you.
Receiving-site pre-acceptance
A receiving facility needs information sufficient to decide whether the load suits its authorisation and treatment process. Leachate should not be described as ordinary sewage merely because it is liquid.
Representative information for the current load
Previous analysis may cease to be representative if the waste source, rainfall or process conditions change. Current source information and analysis where required help the receiving facility assess the actual load rather than relying on an old description.
Settled solids can also need separate consideration from the liquid volume. Their removal may change the material presented for treatment, so collection of the bulk leachate should not be taken as proof that the storage area is free of dense deposits.
Leachate Removal: common questions
What if leachate keeps entering storage during collection?
Continuing production has to be allowed for so recovery does not compromise containment or available storage while collection is taking place.
Does all leachate have the same classification?
No. Classification depends on the actual composition and properties, not the source label alone.
What information helps a receiving facility assess a load?
Source information, quantity and representative analysis where required help support the pre-acceptance decision.
Can leachate be sent to any wastewater treatment facility?
No. The receiving facility must be authorised and able to accept and treat the actual material.
When might older analysis no longer be representative?
Changes in waste inputs, rainfall or liquid characteristics can mean the current load needs updated information or analysis.